TinyPilot

Is it possible to add accounts for viewing only to the TinyPilot web session? We have people we want to be able to view the current session, but can't interact with it.

When I reboot the tinypilot the keyboard and mouse stop working. Video still works so I can see that the USB device not recognized notification pop up on the remote computer. If I go to the remote computer and disconnect the usb cable and plug it bac...

I am unable to see the screen post the upgrade. Find the link which has available logs - https://logs.tinypilotkvm.com/GGePC7JG

The cooling fan on my TinyPilot has started making a lot of noise. I can unplug it and let it cool down to room temperature, it is quiet when it starts again but then gets noisy after an hour or so. Is there a fix?

Persists across reboots, does not go down after it's been up a while, even if I'm not connecting to it. Running off provided USB C power supply. Only thing customized is adding tailscale. I popped the case to see if it was just some obstruction in th...

EDIT: I see that Bookworm isn't supported yet. Should I add these issues to GitHub? I did a search for "Unable to correct problems, you have held broken packages", but didn't find anything. Let me know if you want a Bookworm install for testing, othe...

I have an old 2020 Era, RPi4 w/ 2GB RAM, TinyPilot "All in One" with a GeekWorm C779 HDMI->RPI Camera board, running Buster. If I wanted to "refresh" it, could I just replace the SD card with a new BookWorm-based RPiOS and install the latest TinyPilo...

I bought a TinyPilot "all in one" in 2020, but the pandemic threw a monkey wrench into the plans and I'm just now restarting the project it was going to be used for. Is there an easy way to determine which model it is? It's a 3D printed case, w/ a fa...

Running TinyPilot Voyager (original) with pro license software. Prior to recent upgrade to 2.6.2, video from my target machine (Microsoft Surface Laptop 4) worked in both MJPEG and H.264 modes. I only boot the laptop once every few weeks so I upgrade...

When my TinyPilot is attached to my Windows 10 computer, the only place where I see "TinyPilot" is under the Audio Inputs and Outputs section. "TinyPilot Intel(R) Display Audio" also appears under the audio outputs selectable on the taskbar. When I r...

Hi, Am I correct that all TinyPilot devices now ship on Bullseye? Bullseye supports adding RealVNC as a server/service. I recall other threads here saying VNC wasn't supported; is installing it via Bullseye (apt -y install realvnc-vnc-server" allowed...

This is a place for TinyPilot users to;

Edit: Resolved after changing video setting to H.264

I see a menu option on the Voyager 2 for Keyboard shortcuts and all it has is CTRL-ALT-DEL. I want to add ALT-TAB to it, as well as others that I use. How can I do this?

Hi, when I try to log in to tinypilot via SSH, I get this: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THA...

I'm using two tinypilots and one of them started to make a lot of noise. It's coming from fan and not sure how to fix it.

This site can’t be reached Check if there is a typo in tinypilot. DNS_PROBE_FINISHED_NXDOMAIN This site can’t be reached Check if there is a typo in tinypilot.local. DNS_PROBE_FINISHED_NXDOMAIN This site can’t be reached Check if there is a typo in t...

i installed tinypilot in my raspberry pi 4b , i runned its web interface in my laptop its working fine , but its not showing the security option in system menu and i can't ssh into my tinypilot , i tried with ip and used default password "flyingsopi"...

I set up the TinyPilot KVM using my Raspberry Pi 4 8GB. I downloaded the recommended Raspberry Pi OS Lite Legacy file and created my micro SD card using the Raspberry Pi imaging tool with this downloaded img: 2023-12-05-raspios-bullseye-armhf-lite.im...

Hi there, is there a way to change the keyboard-layout to german layout ? its really annoying while typing passwords best regards

Through target system speaker i am hearing my own voice and outside noise. Though the target system is connected with headphones i am hearing outside noise. check the above attached image, Is it because of this ? Check the logs here https://logs.tiny...

Hello! When I try setting a static IP, it never reboots; it just sits at a > cursor after I paste and hit Enter. Here is what I'm entering: /opt/tinypilot-privileged/scripts/set-static-ip --ip "${TINYPILOT_STATIC_IP="192.168.10.4/24}" --router "${ROU...

Is there a way to transfer a .exe file to the target machine ? Gone through some video about USB Devices Over Network with Raspberry Pi https://www.youtube.com/watch?v=gBCNLs_5pwM https://www.youtube.com/watch?v=KX7IY_Xft0k Especially check this last...

I Bought it from Amazon I tried to reset it but image file can only be downloaded by order id how to reset my tinypilot voyager2a need some help man. Its not supporting sound.

Good day I saw this link https://tinypilotkvm.com/blog/dslr I do get visuals on my pc , but how to trigger the shutter ? the only thing I saw seems to open the unit ? and connect the shutter cable to access the GPIO pins, no 5 and 6 . Is that correct...

I have looked at the other tickets and tried swapping HDMI cables, rebooted (the pilot as well as the computer). I just can't figure out what is going on. It updated and when it was done there was no signal. https://logs.tinypilotkvm.com/lJbcdSFQ I a...

Hello Michael, I have built a tinypilot myself using the recommended hardware. I am experiencing sudden black screens akin to this issue Black screen However, for me, the black screen appears sporadically. restarting the host machine does not seem to...

I've seen a handful of similar posts regarding the same issue but wondered if a fix is found or if I should give it a go with another KVM.. I just received my Voyager 2a and am trying to get things working with the AIMOS 4 port HMDI switch listed on ...

After updraging Tinypilot 2.6.2, screen is showing no signal. On laptop boot, it's showing but after laptop boot, no signal. https://logs.tinypilotkvm.com/tmnxIcrr

Hi all, We want to connect remotely to a TinyPilot Voyager device using port forwarding on our router. We have a dynamic public IP address and we need to use a DynDNS service (No-IP for example) to connect, but we see that pur router doesn't have any...

From the basic start up screen I was able to access the web interface that the TinyPilot voyager2 was connected to. I would prefer to lock down the web interface by creating 1 additional login that (for the web interface) does not have the ability to...

How do I setup the hobbyist kit to use wifi instead of ethernet? Ran out of room on my switch.

Hi Michael. I purchased TinyPilot voyager and set it up for a laptop recently. It worked fine after my first setup. But once I detached the device from the laptop and did attach to the laptop, TinyPilot started to fail to catch the screen (NO SIGNAL ...

I have the Tiny Pilot Pro and I just updated everything to the latest, but the audio is not working The image I downloaded says Tiny Pilot Voyager 2a, but the help still says Tiny Pilot Pro Does that mean it's not supported? Since the help says it's ...

I've read through the FAQ documents but am still confused. I have three laptops, laptop A and B. Laptop A will have TinyPilot plugged in. Laptop B is on the same network as Laptop A. Laptop C will sit in a different network and access Laptop A. I und...

Hello, I have tried to follow the guide to setup my TinyPilot KVM using my Raspberry Pi 4 Model B 8GB. I purchased a USB HDMI capture device just like the one in this guide: https://tinypilotkvm.com/blog/build-a-kvm-over-ip-under-100#how-to-build-you...

Since a while i can not use the key > or pipe key anymore. Keyboard layout is MAC and Tiny is displaying a windows version. I guess this problem came with an update. How can this beeing solved.

I've got a use case where people at a central office location wants to have view only h264 streams from Tinypilot devices deployed in remote locations with metered internet (Starlink). We have a working implementation for that using RTSP cameras feed...

is there a way to keep track of user log ins or trigger notification when a user logs in?

How to rename the device ? Currently it shows as tinypilot USB device It currently shows under mass storage devices under Device Manager Is it possible to have it show up as something more generic? https://docs.microsoft.com/en-us/windows-hardware/dr...