TinyPilot

Hi Currently I am in Canada, I purchased the product from here which is 110Volts. If i move to different location like India it is 240V. Will this product support ? If not what's the solution ?

I've had the tiny pilot for several months. This morning I noticed a grinding noise which turned out to be the TinyPilot. Is this covered by warranty? if not, are there specs for the fan that I can order a replacement?

I know there is multiple reports asking for two way audio, but recently PiKVM included this feature and really wanted to know if there is work in progress to do the same in Tinypilot or any idea to include it in a future version. This will bring a lo...

Hello, I have a work laptop that I work from home with and would like to travel but I am unable to leave the US with it. My work laptop doesn't allow me to download or install programs. To my understanding, both laptops need to be fairly close to one...

I have an Hamachi VPN. I have a TinyPilot which mostly works - I have to override the IP for tinypilot using the hosts file if I am on a network where my local address is not a 192.168.., but other than that, it works. I want to get a second unit, on...

I need to connect the Tinyplot UI interface from different locations, specifically using different internet connections that are not shared. This is necessary because my work requires frequent travel, sometimes abroad. If there is a solution, please ...

Enjoying trying out our first TinyPilot. There is great potential with a few changes. I'm willing to do the work or collaborate. I haven't dug into the device coding yet and don't really know what I can and can't change. For broad adoption in our glo...

Hello! I got my TinyPilot Voyager 2a PoE and it is working great. I'm using the wall plug for power for now. Does there happen to be a way to query the TinyPilot from the linux command line and tell if the Power-over-ethernet is also being supplied? ...

Hey guys, Trying an install on RPI Zero 2 W, Bullseye 32 Bit printenv does show FORCE_INSTALL=1 as set Doesnt seem to actually force the install? What am I missing here? curl --silent --show-error https://raw.githubusercontent.com/tiny-pilot/tinypilo...

OK I just get another new Tinypilot , I found a new feature for stream video. if there is any possibility for voices in 2 direction - work as speaker and mic ?

I am accessing TinyPilot remotely over 8443 > 443. However when doing this it flips to mjpeg and I tried turning the STUN server to Google and to GMX, but the issue still persists. On the local network it is fine. Do I need to also forward any STUN p...

Trying to upgrade from 2.5.0 to 2.5.4, the link to the log is here: https://logs.tinypilotkvm.com/pj6BgiHx Seems like perhaps two error logs: TASK [ansible-role-ustreamer : check if legacy Janus package is installed] ***** fatal: [localhost]: FAILED!...

Hi there, Having an issue with playing audio and streaming using H.264. I have been through the other tickets and appears that everything is working and the Janus server is up and running and active. Do I need port forwarding? I am trying to access i...

I could not tell from reading the website. Does TinyPilot allow me to reboot the computer it is monitorinig, say if it is in a hung state? Thanks! - Jason

I bought a tiny pilot KVM Voyager 2 4 months ago and used it without issue. Recently I am gonna reconnect it and use it but have some errors on the web browser like this. import glob import os import subprocess import sys from distutils import log fr...

I have verified the network cable and hub are all working but I can't get the Ethernet lights to come on the Pi, nor does it show link on the switch. Any troubleshooting I can do or is it a bad Ethernet on the RPi?

Hello, the recent update to accommodate clicks from touchscreen/iPhone has been a game changer, however is there a way to click a drag? Im unable to move and resize windows.

Is there a way to transfer a .exe file to the target machine ? Gone through some video about USB Devices Over Network with Raspberry Pi https://www.youtube.com/watch?v=gBCNLs_5pwM https://www.youtube.com/watch?v=KX7IY_Xft0k Especially check this last...

I don't have router at home any only have wifi. Is there a step by step instructions to set this product up?

Can someone help me figure out what's the problem, I can get access the web interface but I cant get the screen to work, tried hdmi and the VGA. Also the log shows the usb cannot be found? I tried uploading or posting my log but it says has to be an ...

From the basic start up screen I was able to access the web interface that the TinyPilot voyager2 was connected to. I would prefer to lock down the web interface by creating 1 additional login that (for the web interface) does not have the ability to...

I have a REMOTE tinypilot that I lost the ability to ssh in, and also upgrade. How can I fix it?

I recently experienced a power outage that lasted almost an entire week due to a hurricane. After power was restored, the TinyPilot booted up, but I lost connection to it because the IP address was changed by my router DHCP. I've since corrected that...

Hi, I hope you're all having a great day enjoying Tinypilot. I've been using Tinypilots for several months without any issues, but with my new laptop, I'm experiencing something unusual. I connected the laptop to a new Tinypilot, but I received a "No...

Hello all, I have been attempting to install TinyPilot on a Pi 5 and I am struggling hard. Running ubuntu desktop just trying to get this to install on any os. I am able to SSH into the Pi and have no network issues at the moment. Had issues with ras...

I just received my TinyPilot v2. I do have visual with the Target machine, but do not have any control over mouse/keyboard Troubleshooting steps taken: 1- Flashed SD card 2- Tried multiple source and target machines Both Source and Target machines ar...

I just connected TinyPilot v2 1- Red Power Light is solid red 2- Green Light is also solid green 3- Ethernet cable is connected to Router and TinyPilot 4- Data Cable Connected to TinyPilot USB-C port and Target Laptop USB-A port 5- HDMI connected to ...

Hello, After setting up Tinypilot and Tailscale, would I be able to travel and connect it to any router and it work without any additional setup? Would it be accessible right away? If so, if I bought a wifi to ethernet adapter, could use that to conn...

I recently received my tiny pilot v 2a in the mail and I am attempting to set it up. I was wondering if someone here could direct me on how to set this device up without using ethernet. I do not have direct access to the router in my building; howeve...

when everything is setup the next step to go tinypilot i get can not reach this page this is a new unit

I have a number of the TinyPilots and they work great. I got another laptop and for some reason with the TinyPilot Pro, the mouse tracking is off about an inch or so, because they don't line up between the one I'm using and the one on the laptop So w...

I just purchased the most recent TinyPilot Pro and updated to version 2.6.3 but I still can't stream audio I followed the troubleshooting guide, but I still can't get it to work in the latest Chrome browser with sound enabled How else can I troublesh...

Hey I need to return an product. Need help with it. I just bought it on dec 2nd.

I am using multiple tinypilots to operate on custom boxes. A recent update of these debian based boxes breakes mouse function. I was told, the it would work if mouse is configured to use relative coordinates. And indeed, if I check with a PiKVM (stil...

I've been using my TinyPilot Pro for about a year and a half without issues. I use a KVM switch to remotely toggle between multiple devices, and all my devices work flawlessly except for a new laptop, a Lenovo ThinkPad. While I can get video output, ...

Hi, I have made the payment to purchase TinyPilot. The payment method that I'm using is PayPal. I have proceeded the payment and was successful, but nothing happened on the check out page. What should I do?

facing 2 problems unable to copy paste some characters are not typed same like hash # etc quoted text