TinyPilot

Current machine = Macbook Pro Target machine = the machine I want to remotely control, a desktop PC. I have set-up TinyPilot with my target machine and can access it via IP address in a web browser using TailScale. Here's what I see: https://ibb.co/0...

I can't update the tinypilot The update failed: Command '['sudo', '/opt/tinypilot-privileged/scripts/update']' returned non-zero exit status 2. https://logs.tinypilotkvm.com/6RBTyVpF Please advise, Alexander

When booting into the bios on an MSI X570-A PRO, the interface essentially becomes completely unusable. I managed to get it into the advanced -> config mode using the keyboard, but then even that became unresponsive quickly. This is the first time us...

Hi, I have not been able to get the TinyPilot Voyager 2 PoE up and working. For $474.81, I hoped for a seamless solution. Forum-based support has not been responsive enough and unfortunately, I don't have much time to wrestle with this since I need t...

Hello, I installed the tinypilot and so far it's been great. I use it to remote control a work laptop at the office from home. I was wondering if there is a way to stream the audio/microphone so that I would be able to also take calls from the work l...

Hi, my SSH access was disabled and unable to enable back. may i know how to enable it? thanks!

When my TinyPilot is connected directly to a PC it works fine, but if I try to connect it via an AIMOS KVM as described in the KVM compatibility list (i.e. combined with HDMI splitter) the keyboard works but the mouse does not, the pointer jiggles ra...

Hello there :) I see that experimental support was added for H264 streaming, but I don't see any way to enable it in the GUI. I'm guessing it's done over SSH and if so, how? Thanks!

First I love being able to work on my 2nd machine within a window on my primary desktop. Thank you. [edit: I am running in Chrome's "create shortcut" app mode, if that matters.] But when I use Alt-Tab (yes, I am an long-time keyboard user) to switch ...

I just purchased a TinyPilot Voyager 2 in hopes of using it with our Raritan Dominion KXII.. I had no issue setting the unit up. I did purchase the VGA to HDMI adapter and plugged that into the Raritan KVM. I can see the main menu and the keyboard an...

Using Tinypilot voyager with Tailscale on ethernet cable over IP. Was working before that, but was having internet issues. Any ideas what happened or how to fix? Getting before the login page should be popuping. instead get this: {"code":null,"messag...

Hello Guys, We've bought TiniPilot2 for about 6 months ago, but we never were satisfied. The keyboard simply crashes in BIOS, in different Linux systems like Centos 7, Almalinux 8 and others. Also a lot of video glitches. I don't understand why so, b...

i dont have wifi enabled yet, but im curious, as opposed to connecting to the tinypilot's wifi ssd (presumably)is there a way to feed an ethernet cable from a router with internet, or a computer, into tinypilot, and have my tinypilot , which has tail...

I need to connect 3 computers and use them remotely. Do I need to get 3 Voyager 2 units, or can I use one unit to control each of the three computers from my tablet?

I'm a student writing custom software to automate a host machine (also referred to as the "target") through the TinyPilot Voyager 2 using the exposed APIs defined in api.py (for RESTful calls) and socket_api.py (for WebSocket connections). For the cu...

When I tried to update tinypilot today, I discovered that it had run out of space. Investigation showed that /var/log/syslog and /var/log/kern.log were about 7 gigs each. The reason probably is that I only run tinypilot on a need basis, i.e. I don't ...

I installed our first Tinypilot today and added our custom SSL certs. When trying to connect to NGINX we realized there was a public-key signature algorithm mismatch so the client/server couldn't agree on a cipher and the SSL handshake failed. It was...

i try to turn on ssh on the security page in tinypilot, it shows disconnected after a few seconds (red button on bottom left), but I get this error in a pop up. Refreshing shows ssh still disabled. how to fix this? Also any commands, once I do ssh, t...

The update from 2.5.0 to 2.5.2 fails. The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 100. The issue appears to be here: dpkg: unrecoverable fatal error, aborting: reading statoverride file '/v...

No mouse or keyboard input. Confirmed using USB-C (Data) from TinyPilot to USB-A on device. Updated to latest version 2.5.2 Logs - https://logs.tinypilotkvm.com/kHBQq5rL lsusb Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Dev...

Use the web based upgrade and watched all the messages. When completed got a message something like "Can not connect. Please power off and on and try again" I power cycled and still no web access or response to ping. Please advise how to proceed. Tha...

Hello, I was able to get my tinypilot Voyager 2 v2 set up, and calibrated the remote access using the tailscale client. Great functionality and when accessing from my PC I have no complaints! I have not tested off site, but I was able to connect from...

Hello, I've purchased the Voyager 2 a few months ago (July) and it's been working fine the few times I've had to use it, but recently I've noticed that my keyboard and mouse don't work anymore. I've checked the logs and I get the standard "Is USB cab...

I have a TinyPilot Voyager 2 and it seemed to be working fine for a while. One day, it apparently stopped sending USB input. I tried running: echo -ne "\0\0\0\0\0\0\0\0" > /dev/hidg0 and got an error saying: echo: write error: Cannot send after tran...

screen only shows windows I can see the reboot or BIOS screen it says no signal until windows boots

we got various Lenovo Thinkpad Laptops (E and T series) and very often it will happen that the screen goes black. Not sure what is causing this, rebooting the Tinypilot or pressing anything on keyboard does fix it. Even reconnecting HDMI cable is not...

Hi, I tried to upgrade the official tinypilotkvm Buster device/image to Bullseye, by following the Debian instructions for upgrades. The process failed due to some of the tinypilot packages and the device now won't even boot. No need to troubleshoot,...

Hello, I logged into https://tinypilotkvm.com/pro/license-check with my email and order number, and I downloaded the latest tinypilot-voyager-2.5.2-2023-01-17T1501Z.img. I see that it's still based on Raspberry Pi OS Buster, is there a newer version ...

Hi, i've enabled the wifi and now would like to disable the wifi, and only route traffic through ethernet, how would i be able to do that.. thanks

Hello. I bought my pilot 2 wks ago. Tinypilot worked fine till yesterday. My computer and the tinypilot are on the same network. I can ping it but I cannot open anything in the browser. It shows err "tinypilot refused to connect." The ethernet connec...

Original data cable is plugged into DATA USB C port on Tinypilot Voyager 2 and then plugged into a USB 3 port on the target machine. Video works well, USB does not seem to work. Here are logs: https://logs.tinypilotkvm.com/HD4qpWF3 The keyboard bubbl...

Having issues with display back. Only option is to reboot the device. How do I go about getting this resolved?

I'm using a tinyPilot Voyager 2 with an Iogear KVM switch. The KVM does not support the absolute positioning HID that tinyPilot presents; the cursor just freaks out all over the screen of whatever machine I connect to, which can be a little dangerous...

Is there any way for Tiny Pilot to be detected (as opposed to a standard kb, mouse, or monitor)? I see the computer show the standard "HID-compliant" mouse and keyboard... and a generic monitor via Device Manager. What about via WMI or other system q...

I bought the TinyPilot Voyager 2 PoE last month, and it works fine with the USB power supply. I just bought the Ubiquiti UniFi Switch Lite 8 PoE which is supposed to provide 802.3at power ports. Connected over a PoE cat8 wire from the switch, while i...

Hello Friends Need help with setting up TinyPilot for the first time on my personal laptop. Followed all the steps as mentioned but I am unable to see TinyPilot in IP scanner. Also the TinyPilot in the not showing in Talescale admin window). Tried al...

Hi, i would like to rename the tab name from "tinypilot" to something more common like "laptop1 ...". How can this be done?

Mouse/Keyboard has lag. 5sec-10sec. Sometimes 2sec How do I check if H264 is running properly? I get this message while following the steps in post https://tinypilotkvm.com/blog/whats-new-in-2022-05#enabling-h264-video. My logs https://logs.tinypilot...