TinyPilot

Hello Guys, We've bought TiniPilot2 for about 6 months ago, but we never were satisfied. The keyboard simply crashes in BIOS, in different Linux systems like Centos 7, Almalinux 8 and others. Also a lot of video glitches. I don't understand why so, b...

i dont have wifi enabled yet, but im curious, as opposed to connecting to the tinypilot's wifi ssd (presumably)is there a way to feed an ethernet cable from a router with internet, or a computer, into tinypilot, and have my tinypilot , which has tail...

I need to connect 3 computers and use them remotely. Do I need to get 3 Voyager 2 units, or can I use one unit to control each of the three computers from my tablet?

I'm a student writing custom software to automate a host machine (also referred to as the "target") through the TinyPilot Voyager 2 using the exposed APIs defined in api.py (for RESTful calls) and socket_api.py (for WebSocket connections). For the cu...

When I tried to update tinypilot today, I discovered that it had run out of space. Investigation showed that /var/log/syslog and /var/log/kern.log were about 7 gigs each. The reason probably is that I only run tinypilot on a need basis, i.e. I don't ...

I installed our first Tinypilot today and added our custom SSL certs. When trying to connect to NGINX we realized there was a public-key signature algorithm mismatch so the client/server couldn't agree on a cipher and the SSL handshake failed. It was...

i try to turn on ssh on the security page in tinypilot, it shows disconnected after a few seconds (red button on bottom left), but I get this error in a pop up. Refreshing shows ssh still disabled. how to fix this? Also any commands, once I do ssh, t...

The update from 2.5.0 to 2.5.2 fails. The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 100. The issue appears to be here: dpkg: unrecoverable fatal error, aborting: reading statoverride file '/v...

No mouse or keyboard input. Confirmed using USB-C (Data) from TinyPilot to USB-A on device. Updated to latest version 2.5.2 Logs - https://logs.tinypilotkvm.com/kHBQq5rL lsusb Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Dev...

Use the web based upgrade and watched all the messages. When completed got a message something like "Can not connect. Please power off and on and try again" I power cycled and still no web access or response to ping. Please advise how to proceed. Tha...

Hello, I was able to get my tinypilot Voyager 2 v2 set up, and calibrated the remote access using the tailscale client. Great functionality and when accessing from my PC I have no complaints! I have not tested off site, but I was able to connect from...

Hello, I've purchased the Voyager 2 a few months ago (July) and it's been working fine the few times I've had to use it, but recently I've noticed that my keyboard and mouse don't work anymore. I've checked the logs and I get the standard "Is USB cab...

I have a TinyPilot Voyager 2 and it seemed to be working fine for a while. One day, it apparently stopped sending USB input. I tried running: echo -ne "\0\0\0\0\0\0\0\0" > /dev/hidg0 and got an error saying: echo: write error: Cannot send after tran...

screen only shows windows I can see the reboot or BIOS screen it says no signal until windows boots

we got various Lenovo Thinkpad Laptops (E and T series) and very often it will happen that the screen goes black. Not sure what is causing this, rebooting the Tinypilot or pressing anything on keyboard does fix it. Even reconnecting HDMI cable is not...

Hi, I tried to upgrade the official tinypilotkvm Buster device/image to Bullseye, by following the Debian instructions for upgrades. The process failed due to some of the tinypilot packages and the device now won't even boot. No need to troubleshoot,...

Hello, I logged into https://tinypilotkvm.com/pro/license-check with my email and order number, and I downloaded the latest tinypilot-voyager-2.5.2-2023-01-17T1501Z.img. I see that it's still based on Raspberry Pi OS Buster, is there a newer version ...

Hi, i've enabled the wifi and now would like to disable the wifi, and only route traffic through ethernet, how would i be able to do that.. thanks

Hello. I bought my pilot 2 wks ago. Tinypilot worked fine till yesterday. My computer and the tinypilot are on the same network. I can ping it but I cannot open anything in the browser. It shows err "tinypilot refused to connect." The ethernet connec...

Original data cable is plugged into DATA USB C port on Tinypilot Voyager 2 and then plugged into a USB 3 port on the target machine. Video works well, USB does not seem to work. Here are logs: https://logs.tinypilotkvm.com/HD4qpWF3 The keyboard bubbl...

Having issues with display back. Only option is to reboot the device. How do I go about getting this resolved?

I'm using a tinyPilot Voyager 2 with an Iogear KVM switch. The KVM does not support the absolute positioning HID that tinyPilot presents; the cursor just freaks out all over the screen of whatever machine I connect to, which can be a little dangerous...

Is there any way for Tiny Pilot to be detected (as opposed to a standard kb, mouse, or monitor)? I see the computer show the standard "HID-compliant" mouse and keyboard... and a generic monitor via Device Manager. What about via WMI or other system q...

I bought the TinyPilot Voyager 2 PoE last month, and it works fine with the USB power supply. I just bought the Ubiquiti UniFi Switch Lite 8 PoE which is supposed to provide 802.3at power ports. Connected over a PoE cat8 wire from the switch, while i...

Hello Friends Need help with setting up TinyPilot for the first time on my personal laptop. Followed all the steps as mentioned but I am unable to see TinyPilot in IP scanner. Also the TinyPilot in the not showing in Talescale admin window). Tried al...

Hi, i would like to rename the tab name from "tinypilot" to something more common like "laptop1 ...". How can this be done?

Mouse/Keyboard has lag. 5sec-10sec. Sometimes 2sec How do I check if H264 is running properly? I get this message while following the steps in post https://tinypilotkvm.com/blog/whats-new-in-2022-05#enabling-h264-video. My logs https://logs.tinypilot...

I forgot the Tinypilot pro login username and password…how to reset???? I know this is a noob question :)

Trying to run wireless keyboard/mouse off usb dongle that's plugged into tiny pilot? Am I missing something here, I thought in normal hardwired KVM's you plug the USB dongle into the kvm switch and you're done. I'm not getting any output from these t...

Hi all, here’s my situation: J1 requires me to work hybrid, at least 2 days in the office so I’m planning to bring my personal laptop so that I can do both J1 and J2 work on the same machine bought a tinypilot voyager 2 based on my research. So here ...

I'm about to embark on my first TinyPilot installation. I have several systems that I'm wanting to manage, and I'm going the DIY route initially. As I was looking through the instructions for VGA capture, I see that the typical solution is a VGA to H...

I just reflashed my TinyPilot Pro to 2.5.0 after I could not get it to work I wanted to set a static IP but I did not want to have to put this TinyPilot on the Internet just to download a script to apply the static IP address as shown in this post: h...

Hi, Got a voyager pro connected to an industrial windows 7 computer with a Quadro K620 that has DVI and Displayport output. Local display is using DVI and duplicate display is output using a couple of adapters through displayport->DVI->HDMI->TinyPilo...

Hello, I am unable to use POE on my voyager 2. I hooked it up with internet and it looked like theres no power unless theres the USBC power

Happy holidays from the TinyPilot team! Over the next few days, the TinyPilot team will be taking some well-earned time off - including the support team here on the forum. You're more than welcome to continue posting and asking questions, but respons...

Hello, I have a specific use case in mind, one of our contractors needs remote access to an HMI panel with only USB and Ethernet ports. The USB is for the Mouse and Keyboard and since the panel has no video in/out I would like to use an HDMI camera a...

I am using the GUI to try and upgrade. This issue I am having is that the upgrade says it is successful, but even after a reboot of the Voyager, it says it is on 2.4.0 and that upgrade to 2.5.0 is available. I have run through the upgrade process 3 t...

Hello, we have a KVM-Matrix-Switch here in our Company. In our Office we are eight people with only one KVM and Monitor. So we decided to buy a tinypilot, to put the system into browser. The Guntermann and Drunck DVI-CON is the end of the KVM-Matrix,...